buzzbait modifications Archives - https://blog.lurepartsonline.com

Tricks to Make Your Buzzbaits Catch More Fish

Want to learn some Tricks to Make Your Buzzbaits Catch More Fish?

Buzzbaits are one of the most exciting lures used to catch bass. And when the buzzbait bite is hot, some of the biggest bass in the lake can be caught by chunking a buzzbait.

But, no matter what kind of buzzbait you throw, whether you made it yourself or bought it in a retail package, there are always ways to make them catch more fish. Today we’re going to show you some of the best tips and tricks to make this happen.

First, did you realize that buzzbaits should be broken in before you use them? Absolutely! This is pretty easy to do, a couple of different ways. The first way is to simply hold the buzzbait out the window as you drive to the lake. This isn’t the safest way to do it, since it takes your attention off of your driving.

The best way to do it, without worrying about getting distracted, is to use a plastic tie wrap to attach the buzzbait to your car or truck antenna and then leave it there while you drive. This lets the blade spin in the wind, wearing the blade and rivet in and causing them to squeak loudly on the retrieve.

One of the easiest tricks to make your buzzbaits catch more fish is to use a good pair of pliers to squeeze the rivet and crimp it down on the top wire shaft. Slide the rivet all the way to the back end of the wire and crimp it down as tightly as you can.

Now, with that rivet stationary, there will be plenty of friction between the rivet and the buzzbait blade. This will create a squeaking noise that will attract more fish and trigger more strikes! And the more you use your buzzbait, the louder that squeak will get 🙂

These are just a couple of the easiest tricks to make your buzzbaits catch more fish. There are a few more in the video below, so be sure to give it a watch.

And the next time you make new buzzbaits, or even if you buy a new one, be sure to use these great modifications to squeeze more bites out of your buzzbait and put more fish in your boat!

Enjoy the video.

Items used for this project:

If you enjoyed this post, please be sure to like it and share it with your friends.

And, as always, if you need any kind of lure-making supplies, be sure to visit our website, at http://lurepartsonline.com

Spinnerbait and Buzzbait Mods to Catch More Fish

It’s no secret that spinnerbaits and buzzbaits catch a ton of fish. Even cheap retail baits right out of the package can work really well.

The problem, though, is that everybody and their brother throw spinnerbaits and buzzbaits. This makes them very recognizable to the fish you’re trying to catch.

Picture this: You hit the local tackle shop or major retailer and buy yourself a handful of new lures.

While you’re there making your purchase, a half dozen other anglers are doing the same thing. They might not be there in the store when you are, but they will be at some point. And guess what. They’re buying the same exact lures you’re buying. And they’re throwing them on the same lake as you, targeting the same fish as you.

That’s a recipe for some tough fishing days, with everyone using the same lures.

So what can you do to fix this problem? It’s simple! Make your lure look and act differently than the rest of them. It’s not hard to do and it doesn’t cost much, either. Stick with us here and keep reading. By the time you’re finished, you have learned some spinnerbait and buzzbait mods to catch more fish 🙂

So what can you to change the look of your spinnerbait, buzzbait or bladed jig? Well, the style of these baits is pretty much the same, no matter who makes them. It’s just part of their inherent design.

But the overall look of a bait can be changed drastically with a little tweaking and experimentation. This is where our little tips and tricks come in.

Take a look at the blades on your spinnerbait, buzzbait or bladed jig. For the most part, they’re usually pretty ordinary. Like we said, they all tend to look the same, no matter who makes them. Right?

Well, here’s where you can set yours apart and make them stand out in the crowd.

There are some pretty inexpensive products available that can turn your spinnerbait, buzzbait or bladed jig into a fish-catching machine, even on pressured lakes. And they only take a minute or two to install on your lures. And your lure is transformed instantly into a new one, with a completely different look.

OK… no more teasing you! Here’s the “secret sauce”, so to speak. It’s called lure tape.

What’s lure tape? It’s self-adhesive tape that has various types of reflective patterns on it. It excels at giving your bladed baits a new look, to set them apart from the crowd and give them new appeal. And it does that without having to buy another new lure.

Lure tape can also be used to breathe new life into an old lure when the blades have become old and dull. Blades that are worn and don’t flash much anymore won’t attract as many fish. Lure tape is a great way to fix that too.

Another advantage with lure tape is that you can instantly change the appearance of a lure temporarily, based on conditions you happen to encounter on the water.

When conditions change, or if you hit another body of water, remove the sticker and revert right back to the look that the lure had prior to using the lure tape.

Lure tape can be bought in a myriad of colors. It can also be bought in pre-cut shapes, for specific blade shapes and sizes, or you can buy a roll of it and cut it to fit whatever you need it to fit! You can even buy a lure sticker assortment that has a bunch of different colors, sizes and shapes already cut for you. You just peel and stick them on.

You can also buy it in rolls of a specific color. This allows you to cut it at whatever length you need and then shape it to the lure you want to change the look of.

Oh, and don’t be mistaken and think that this will only work for blades on spinnerbaits. It can be used on crankbaits, bladed jigs, buzzbait blades and other lures too. Your imagination is the only limit when it comes to spinnerbait and buzzbaits mods to catch more fish.

So check out the video below. It will give you some cool ideas as to how lure stickers can be used to spruce up a lure or change the look of it completely. Enjoy!

Items used for this project:

Prism Tape Rolls
Blade Stickers
Dancer Jig Blade Stickers
Holographic Lure Stickers
Sonar Bait Stickers
Holographic Disco Tape

If you enjoyed this post, please be sure to like it and share it with your friends.

And, as always, if you need any kind of lure-making supplies, be sure to visit our website, at http://lurepartsonline.com